Robamat Used Hot Oil Units

hot oil die cast trim presses high pressureRobamat manufactures hot oil and hot water type die and mold temperature control units (also know as hot water, hot oil heaters or heated oil process control units). Commonly available are single zone and dual zone Robomat units in and including 6 kw, 12 kw, 24 kw and 36 kw per zone. These units are also commonly used as process boiler applications units outside the die casting industry.

Die Cast Machinery, LLC is a dealer that specializes in second hand Robamat temperature control units; we buy and sell Robamat hot oil and hot water units daily. We commonly stock and can supply Robamat temperature control units, both hot oil and hot water units in the following sizes: 6 kw, 9 kw, 12 kw, 18 kw, 24 kw, 36 kw and 48 kw. All of these sizes are available in single, dual and three zone configurations. Robamat hot oil and hot water temperature control units are commonly used in injection molded plastics, extruded plastics, extrusion, blow molding, plastic film, foundry and die casting applications for preheating and maintaining correct tooling temperature; they are extensively used by die casters to maintain die temperatures. They are also used in process industries including food processing, chemical, petroleum and pharmaceutical industries.

ID # Brand Status Description
1859 Robamat Sold Thermocast 4212 Dual Zone, 12 kw per Zone
1860 Robamat Sold Thermocast 4212 Dual Zone, 12 kw per Zone
2958 Robamat Sold Robatherm Single Zone Hot Oil Die Temperature Control Unit
2959 Robamat Sold Robatherm Dual Zone Hot Oil Die Temperature Control Unit
2960 Robamat Sold Robatherm Hot Oil Die Temperature Control Unit
3693 Robamat Sold Robamat - 3212 40 KW Dual (two) Zone Portable Hot Oil Process Heater Temperature Control Unit with Cooling Water Circuit, Controls

Common options and features available on temperature control units include single zone, dual zone and three zone configurations; auxiliary cooling circuits using a process water cooled heat exchanger, drain valves, hour meters, visual and audio fault alarms, low level alarm, auto-venting sequences, pressure switch for low pump pressure, process pressure gauges and reversing pumps. Voltage options include: 200, 208, 230 volt, 380, 415, 440, 460, 480 volt and 575 volt (600 volt) three phase primary power in either 50 hertz or 60 hertz. Example: Robamat Thermocast 4212 Hot Oil Temperature Control Unit Descripton: One used (second hand) Robamat "Thermocast" Model 4212, dual zone, 12 kw per zone die temperature control unit, maximum temperature 600 F (320 C). Serial number 15256/2001. Set up as 480/3/60 63 amps. Dimensions are 20" wide, 54" deep and 53" tall. Specifications: Metric / U.S. Standard Number of Zones: 2 / 2 KW per Zone: 12 / 12 Operating Power: 480/3/6 / 480/3/60 Maximum Amperage: 63 / 63 Dimensions (L x W x H) 1372 mm x 508 mm x 1346 mm / 54 Thermocast 4212 Dual Zone, 12 kw per zone.